ProxySQL Admin Configuration

ProxySQL Admin

ProxySQL AdminProxySQL Admin (proxysql-admin) is a powerful tool for configuring Percona XtraDB Cluster nodes into ProxySQL. The proxysql-admin tool comes with the ProxySQL package from Percona apt/yum repositories.

ProxySQL 1.3.2-1 is now available from the Percona repositories. This release is based on ProxySQL v1.3.2a and introduces the following new changes: proxysql-admin_v1.3.2a.md.

Installing on Red Hat or CentOS

If you are running an RPM-based Linux distribution, use the yum package manager to install ProxySQL and proxysql-admin from the official Percona software repository.

First, if your system does not already have the Percona’s yum repository configured, please run the following command:

$ sudo yum install http://www.percona.com/downloads/percona-release/redhat/0.1-4/percona-release-0.1-4.noarch.rpm

Next, install the proxysql/proxysql-admin package:

$ sudo yum install proxysql

Installing on Debian or Ubuntu

If you are running a DEB-based Linux distribution, use the apt package manager to install ProxySQL and proxysql-admin from the official Percona software repository.

First, if your system does not already have the Percona’s apt repository configured, please fetch the repository package:

$ wget https://repo.percona.com/apt/percona-release_0.1-4.$(lsb_release -sc)_all.deb

Next, install the repository package:

$ sudo dpkg -i percona-release_0.1-4.$(lsb_release -sc)_all.deb

Then update the local apt cache:

$ sudo apt-get update

Finally, install the proxysql/proxysql-admin package:

$ sudo apt-get install proxysql

Pre-Requisites

  • ProxySQL and Percona XtraDB Cluster should be up and running.
  • For security purposes, please make sure to change the default user settings in the ProxySQL configuration file. It is recommend you use –config-file to run the proxysql-admin script.

This script will accept two different options to configure Percona XtraDB Cluster nodes;

1) −−enable

This option configures Percona XtraDB Cluster nodes into the ProxySQL database, and add two cluster monitoring scripts into the ProxySQL scheduler table for checking the cluster status.

_scheduler script info:

  • proxysql_node_monitor: checks cluster node membership, and re-configures ProxySQL if cluster membership changes occur
  • proxysql_galera_checker: checks desynced nodes, and temporarily deactivates them. It will also add two new users into the Percona XtraDB Cluster with the USAGE privilege. One monitors cluster nodes through ProxySQL, and the other connects to Cluster node via the ProxySQL console. Please make sure to use super user credentials from Percona XtraDB Cluster to setup the default users.
$ sudo proxysql-admin --config-file=/etc/proxysql-admin.cnf --enable
This script will assist with configuring ProxySQL (currently only Percona XtraDB cluster in combination with ProxySQL is supported)
ProxySQL read/write configuration mode is singlewrite
Configuring ProxySQL monitoring user..
ProxySQL monitor username as per command line/config-file is monitor
User 'monitor'@'127.%' has been added with USAGE privilege
Configuring the Percona XtraDB Cluster application user to connect through ProxySQL
Percona XtraDB Cluster application username as per command line/config-file is proxysql_user
Percona XtraDB Cluster application user 'proxysql_user'@'127.%' has been added with the USAGE privilege, please make sure to the grant appropriate privileges
Adding the Percona XtraDB Cluster server nodes to ProxySQL
You have not given the writer node info through the command line or in the config-file. Please enter the writer-node info (eg : 127.0.0.1:3306): 127.0.0.1:25000
ProxySQL configuration completed!
ProxySQL has been successfully configured to use with Percona XtraDB Cluster
You can use the following login credentials to connect your application through ProxySQL
mysql --user=proxysql_user --password=***** --host=127.0.0.1 --port=6033 --protocol=tcp
$
mysql> select hostgroup_id,hostname,port,status,comment from mysql_servers;
+--------------+-----------+-------+--------+---------+
| hostgroup_id | hostname  | port  | status | comment |
+--------------+-----------+-------+--------+---------+
| 11           | 127.0.0.1 | 25400 | ONLINE | READ    |
| 10           | 127.0.0.1 | 25000 | ONLINE | WRITE   |
| 11           | 127.0.0.1 | 25100 | ONLINE | READ    |
| 11           | 127.0.0.1 | 25200 | ONLINE | READ    |
| 11           | 127.0.0.1 | 25300 | ONLINE | READ    |
+--------------+-----------+-------+--------+---------+
5 rows in set (0.00 sec)
mysql>

2. −−disable

This option removes Percona XtraDB Cluster nodes from ProxySQL and stops the ProxySQL monitoring daemon.

$ proxysql-admin --config-file=/etc/proxysql-admin.cnf --disable
ProxySQL configuration removed!
$

Extra options

i) −−mode

This option sets up read/write mode for Percona XtraDB Cluster nodes in the ProxySQL database, based on the hostgroup. For now, the only supported modes are loadbal and singlewrite. singlewrite is the default mode, and it accepts writes only on one single node (and this node can be provided either interactively or by using the –write-node to specify the hostname and the port number for the one single write node). All other remaining nodes will be read-only and accept only read statements. The mode loadbal, on the other hand, is a load balanced set of evenly weighted read/write nodes.

singlewrite mode setup:

$ sudo grep "MODE" /etc/proxysql-admin.cnf
export MODE="singlewrite"
$
$ sudo proxysql-admin --config-file=/etc/proxysql-admin.cnf --write-node=127.0.0.1:25000 --enable
ProxySQL read/write configuration mode is singlewrite
[..]
ProxySQL configuration completed!
$
mysql> select hostgroup_id,hostname,port,status,comment from mysql_servers;
+--------------+-----------+-------+--------+---------+
| hostgroup_id | hostname  | port  | status | comment |
+--------------+-----------+-------+--------+---------+
| 11           | 127.0.0.1 | 25400 | ONLINE | READ    |
| 10           | 127.0.0.1 | 25000 | ONLINE | WRITE   |
| 11           | 127.0.0.1 | 25100 | ONLINE | READ    |
| 11           | 127.0.0.1 | 25200 | ONLINE | READ    |
| 11           | 127.0.0.1 | 25300 | ONLINE | READ    |
+--------------+-----------+-------+--------+---------+
5 rows in set (0.00 sec)
mysql>

loadbal mode setup:

$ sudo proxysql-admin --config-file=/etc/proxysql-admin.cnf --mode=loadbal --enable
This script will assist with configuring ProxySQL (currently only Percona XtraDB cluster in combination with ProxySQL is supported)
ProxySQL read/write configuration mode is loadbal
[..]
ProxySQL has been successfully configured to use with Percona XtraDB Cluster
You can use the following login credentials to connect your application through ProxySQL
mysql --user=proxysql_user --password=***** --host=127.0.0.1 --port=6033 --protocol=tcp
$
mysql> select hostgroup_id,hostname,port,status,comment from mysql_servers;
+--------------+-----------+-------+--------+-----------+
| hostgroup_id | hostname  | port  | status | comment   |
+--------------+-----------+-------+--------+-----------+
| 10           | 127.0.0.1 | 25400 | ONLINE | READWRITE |
| 10           | 127.0.0.1 | 25000 | ONLINE | READWRITE |
| 10           | 127.0.0.1 | 25100 | ONLINE | READWRITE |
| 10           | 127.0.0.1 | 25200 | ONLINE | READWRITE |
| 10           | 127.0.0.1 | 25300 | ONLINE | READWRITE |
+--------------+-----------+-------+--------+-----------+
5 rows in set (0.01 sec)
mysql>

ii) −−node-check-interval

This option configures the interval for monitoring via the proxysql_galera_checker script (in milliseconds):

$ proxysql-admin --config-file=/etc/proxysql-admin.cnf --node-check-interval=5000 --enable

iii) −−adduser

This option aids with adding the Percona XtraDB Cluster application user to the ProxySQL database:

$ proxysql-admin --config-file=/etc/proxysql-admin.cnf --adduser
Adding Percona XtraDB Cluster application user to ProxySQL database
Enter Percona XtraDB Cluster application user name: root
Enter Percona XtraDB Cluster application user password:
Added Percona XtraDB Cluster application user to ProxySQL database!
$

iv) −−test-run

This option sets up a test/dummy proxysql configuration:

$ sudo proxysql-admin --enable --quick-demo
You have selected the dry test run mode. WARNING: This will create a test user (with all privileges) in the Percona XtraDB Cluster & ProxySQL installations.
You may want to delete this user after you complete your testing!
Would you like to proceed with '--quick-demo' [y/n] ? y
Setting up proxysql test configuration!
Do you want to use the default ProxySQL credentials (admin:admin:6032:127.0.0.1) [y/n] ? y
Do you want to use the default Percona XtraDB Cluster credentials (root::3306:127.0.0.1) [y/n] ? n
Enter the Percona XtraDB Cluster username (super user): root
Enter the Percona XtraDB Cluster user password:
Enter the Percona XtraDB Cluster port: 25100
Enter the Percona XtraDB Cluster hostname: localhost
ProxySQL read/write configuration mode is singlewrite
Configuring ProxySQL monitoring user..
User 'monitor'@'127.%' has been added with USAGE privilege
Configuring the Percona XtraDB Cluster application user to connect through ProxySQL
Percona XtraDB Cluster application user 'pxc_test_user'@'127.%' has been added with ALL privileges, this user is created for testing purposes
Adding the Percona XtraDB Cluster server nodes to ProxySQL
ProxySQL configuration completed!
ProxySQL has been successfully configured to use with Percona XtraDB Cluster
You can use the following login credentials to connect your application through ProxySQL
mysql --user=pxc_test_user --host=127.0.0.1 --port=6033 --protocol=tcp
$
mysql> select hostgroup_id,hostname,port,status,comment from mysql_servers;
+--------------+-----------+-------+--------+---------+
| hostgroup_id | hostname  | port  | status | comment |
+--------------+-----------+-------+--------+---------+
| 11           | 127.0.0.1 | 25300 | ONLINE | READ    |
| 10           | 127.0.0.1 | 25000 | ONLINE | WRITE   |
| 11           | 127.0.0.1 | 25100 | ONLINE | READ    |
| 11           | 127.0.0.1 | 25200 | ONLINE | READ    |
+--------------+-----------+-------+--------+---------+
4 rows in set (0.00 sec)
mysql>

We hope you enjoy ProxySQL Admin!

关注dbDao.com的新浪微博

扫码加入微信Oracle小密圈,了解Oracle最新技术下载分享资源

TEL/電話+86 13764045638
Email service@parnassusdata.com
QQ 47079569